El Mar Mexico Service

El Mar Mexico can offer Repair Service for your equipment needs. With over 40 years of scuba equipment service and repair at our AZ dive shop, we have worked on it all- from the old style double hose regs to the latest rebreather units. We take dive equipment service very seriously to ensure you the best in quality and satisfaction.

We offer visual inspections for aluminium & steel cylinders, hydrostatic testing, regulator annuals and regulator overhauls. Our normal turn around time is approximately two weeks. Remember to have your equipment serviced yearly to help extend the life and eliminate any surprises on your trips.

Repair Rates:

** FYI, most repairs are performed by are Mesa, AZ operation and may take 4 weeks to be completed **

Regulators		(Regulator Only)	(Regulator w/Octopus)
Service		$50 Plus Parts	$75 Plus Parts
1st Stage (only)	$25 Plus Parts
2nd Stage (only)	$25 Plus Parts

B.c.d.'s
Service	$25 Plus Parts
Service (with any Intergrated Alternate Air Source)	$35 Plus Parts

Spare Air
Service	$30 Plus Parts

Computers / Depth Gauges
Battery Change (For computers/depth gauges with Dealer replaceable batteries)	$15
Accuracy Check (Recreational 130 FT)	$15
Accuracy Check (Technical 230 FT)	$35

S.P.G.
Accuracy Check	$10
Rebuild of Swivel pin	$5

Scuba Tanks
Hydro	$35
Visual (Includes VI, Oring, Fill)	$14
Fill	$5
Internal Cleaning	$20
Air Fill Cards(10 Fills)	$40
Air Fill Cards (20 Fills)	$70

Valve Overhauls
K valve	$10
J Valve	$15

All Rates are for Labor ONLY - Parts are Extra!

Certified Air
El Mar Diving Center has the largest compressor system in San Carlos and can fill any size cylinder to any pressure up to 3500 psi. With our extensive compressor and storage system, El Mar will always be able to fill your cylinders.

Compressor System
The compressor system at El Mar Mexico consists of a Poseidon P800.
The compressed air is then filtered five times before being stored in the storage cylinders. The air is then delivered to the customer's tank from the storage cylinders and boosted to the rated pressure with a Haskel Booster if needed.

System Specifications
Compressor
- Poseidon P800, 38cfm
- 4 Filter Towers with Lawrence Factor X-10 Filters
- 1 Filter Towers with Lawrence Factor X-20 Filters

Storage
- Eight (8) 440 Cubic Foot Cylinders

Air Specifications
- Certified CGA Grade "E"

Air Booster Specifications
- Haskel Scuba-Amp, capable of raising cylinder pressure to 3500 psi from 2500 psi

Other Services
PADI C-CARD Replacement	$30
To Send Fax (per page)	$5
To Receive Fax (per page)	$1
PADI Referral Kits	$25